Toilet Water Shut Off Valve Not Working

If you simply cant turn the valve which happens often with fixture shut-offs and old-fashioned main shut-offs you may need to spray the valve with WD-40 and give it time to lubricate before trying again. Hold the flush valve to drain as much water as possible from the tank.

Plumbing And Prevention Tested Your Water Shut Off Valves Lately

This will allow you to inspect it more easily.

Toilet water shut off valve not working. Identify where water is exiting the fill valve. Its necessary for every toilet to have its dedicated shutoff valve for convenience. It could also be that the shutoff valve which is usually behind the toilet and adjacent to a wall is turned off for some reason.

It will stop the tank from refilling. The toilet shut-off valve is also called the stop valve. However thats just a temporary solution and you should fix the valve as soon as possible.

Here Are the Materials You Need. What if the Valve is Turned Off But the Toilet Still Refills. Open the supply valve.

The overflow tube in your tank usually prevents it from overfilling and flooding your bathroom. Standing over the toilet gently lift the fill valves float mechanism to the point where it should be shut off. For instance you might want to shut off the toilet water supply when doing repairs or replacing some toilet components.

After installing the new flush valve I fill the tank back up and it. Whenever you have an issue with your water shut off valve not working you will need to manually turn it off. Begin by locating the toilets shut off valve.

Remove the shut-off valve handle bolt then remove the handle. Its recommended to turn valves on and off periodically and spray them with oil as needed to prevent being unable to close the valve in an emergency situation. Check the fill height.

Unscrew the packing nut with a wrench. It should be attached to the pipe behind your toilet. However due to sustained usage the valve can malfunction leading to leaks or reduced water pressure.

However when the fill valve is not shutting off the water once the tank is full chances are that the toilet fill valve is faulty. I shut the water off so it would not continue to run and no problems there. Turn off the main water supply line and pull the float lever in the tank.

Tightening the Water Supply Line of the Shut off Valve If the toilet water shut off valve is not working sometimes the problem lies on the inlet coming from the toilet line of the shut-off poppet. The shutoff valve is mostly located in the toilets water supply line. It could be dirty or even have some debris in it.

This is the valve controlling water to the toilet usually located below the cistern of the toilet. If the valve still wont completely shut off youll have to find your whole house valve which is usually on an outside wall in the vicinity of your water meter. If that happens it means that your shutoff valve is not performing well.

You can solve this by tightening this inlet. These gate valves are notorious for failing too so dont be surprised if they dont work too. To turn your supply valve back on simply turn the valve.

Hold it there - the fill valve should stay closed. This wont leak or even be noticeable until the water is turned back on so when you turn the water back on be sure to check for burst pipes or leaking around the valve. Most shut-off valves are rather durable and only need to be replaced after many years.

Close the Toilets Shutoff Valve. This will minimize the amount of water from the hose of the toilet connector to the shut-off valve. Unfortunately the water between the spigot and supply shutoff valve frequently freezes in these scenarios and the pipe can burst.

So our Mansfield toilet was running and I installed a new flush valve but it took me a few days just because I needed to get out and get the part. Rinse the toilet and hold the handle to drain the toilet slot.

How To Fix A Toilet Diagnostics Water Valve Youtube